Air Fuel Ratio Meter

Anything related to Lambrettas... ask tech questions, post helpful info, or just read and learn.
User avatar
TED CRUD
registered user
Posts: 261
Joined: Sun Jul 04, 2010 7:31 pm
Contact:

Image



Just bought this bad boy to keep my engine in check when its built ,Discuss........... :D
Smash Ya Pastie
Washington Posse s.c
https://www.youtube.com/watch?v=ZrBpNEjkuLY
Muppet
registered user
Posts: 1279
Joined: Thu Sep 16, 2010 9:54 pm
Main scooter: SX 150 running in

it comes with a sticker i want one,

muppet,
C’est la vie
User avatar
TED CRUD
registered user
Posts: 261
Joined: Sun Jul 04, 2010 7:31 pm
Contact:

is anyone using one ?????
Muppet it is a nice sticker ;)
Smash Ya Pastie
Washington Posse s.c
https://www.youtube.com/watch?v=ZrBpNEjkuLY
User avatar
drunkmunkey6969
Moderator
Posts: 2838
Joined: Sun Jan 04, 2009 1:42 pm
Main scooter: '69 Lambretta GP
Location: North Yorkshire
Contact:

Ted......tell us a bit more about how you plan to install it and use it.
See our YouTube scooter channel for Tech-help: https://www.youtube.com/c/TheScooterFactory/videos
User avatar
CutdownSpence
registered user
Posts: 85
Joined: Sun Apr 21, 2013 3:02 pm
Main scooter: 1966 Silver Special
Location: Cyprus
Contact:

More importantly were did you get it from ?
One Of England's Finest Salad Dodger's.
User avatar
drunkmunkey6969
Moderator
Posts: 2838
Joined: Sun Jan 04, 2009 1:42 pm
Main scooter: '69 Lambretta GP
Location: North Yorkshire
Contact:

CutdownSpence wrote:More importantly were did you get it from ?
Innovate Motorsport
See our YouTube scooter channel for Tech-help: https://www.youtube.com/c/TheScooterFactory/videos
User avatar
Stampede
registered user
Posts: 224
Joined: Wed Jan 07, 2009 5:07 pm
Main scooter: SX200
Location: Landsberg, Germany
Contact:

I used the same tool to set up my carb on my Monza engine this year. Highly reconommend, you can adjust your carb in one day.
john.t5
registered user
Posts: 134
Joined: Sun Dec 06, 2009 11:55 pm
Contact:

How much and how good? Was actually wondering if something like this was available, it would be great for us over in NI where there is no one with scooter experience with a dyno.
User avatar
CANbus
registered user
Posts: 185
Joined: Sun Jan 11, 2009 2:19 am
Contact:

Yes TED Crud I have one but not installed it has yet.
I plan to weld on the socket to the exhaust next time I need to strip the exhaust down.

For me my plan is to run it periodically to check the engine is still within dyno settings.

I also note that the same company has a wifi version that logs to a apple app,
It looks a great bit of kit.
11111111 = 0xFF
User avatar
drunkmunkey6969
Moderator
Posts: 2838
Joined: Sun Jan 04, 2009 1:42 pm
Main scooter: '69 Lambretta GP
Location: North Yorkshire
Contact:

The lamba sensor looks to be the same one I have on my Dyno......a Bosch 5 wire sensor, same as used on AudiTT and such like. However mine is hard wired into the Dyno so it runs through a big box of electronics to convert the signal, which then runs through a PC, and finally the Dyno software. It's is all synchronised with the Dyno rollers and software so that I have a real time readout for the relevant throttle positions and RPM ranges throughout the rev range.......thus I can analyse an air/fuel graph at the end of the run and use the info to adjust accordingly. So the sensor is great......but one of many items which make up a complete picture (sensor, hardware, software, Dyno rollers, PC, throttle position, RPM range, Dyno curve). All I can see in the pic (via my phone) is the sensor, and a CD........? How will you rig this up it get effective info? And will it be a permanent fixture or detachable? Have you a link to the page you purchases from so I can read the spec? Cheers.
See our YouTube scooter channel for Tech-help: https://www.youtube.com/c/TheScooterFactory/videos
Post Reply Previous topicNext topic
  • Information
  • Who is online

    Users browsing this forum: Amazon [Bot] and 36 guests