Loving that.
But preferred the Snetty to the current seat though.
Just my own personal like. But it ain't my scoot....
Wish it was.
Gorillaz's
- Scootissimo
- registered user
- Posts: 95
- Joined: Wed Jan 21, 2009 10:17 pm
- Location: IOW
- Contact:
I have been trying to get back into the mood, here's some more stuff I have been doing of late.
Fitted Side Stand
Replaced the first gear and kickstart shaft, tried out the engine jig at the same time. It seemed to go ok, it can be indexed and locked in 12 different positions.
Also fitted the new BGM silent blocks.
Finally got around to fitting my SIP speedo. Like Minorty from this forum, I have decided to mount the speed sensor to pick up off the rear wheel.
I made a widget that will be pressed and glued into the rear shock bottom mount.
Fitted Side Stand
Replaced the first gear and kickstart shaft, tried out the engine jig at the same time. It seemed to go ok, it can be indexed and locked in 12 different positions.
Also fitted the new BGM silent blocks.
Finally got around to fitting my SIP speedo. Like Minorty from this forum, I have decided to mount the speed sensor to pick up off the rear wheel.
I made a widget that will be pressed and glued into the rear shock bottom mount.
11111111 = 0xFF
Fitted the SIP sensor to the scoot today
Fitted and fired up the SIP speedo, view from the cockpit,
Tried out this new digital torque meter, found it to be very accurate, even measures torque for left hand threads, watch out flywheel.
I really must change that seat
The man cave
I have some new gauges and sensors to fit also, when these are in place then the fun starts.
My control programe is nearlly finished , it will have some speacial features such as logging, electronic choke
Automatic choke on a pre seleted EGT setting or RPM etc (hopefully a anti seize function)
The SIP catalouge is fantastic even considered buying a Vespa at one point.
Fitted and fired up the SIP speedo, view from the cockpit,
Tried out this new digital torque meter, found it to be very accurate, even measures torque for left hand threads, watch out flywheel.
I really must change that seat
The man cave
I have some new gauges and sensors to fit also, when these are in place then the fun starts.
My control programe is nearlly finished , it will have some speacial features such as logging, electronic choke
Automatic choke on a pre seleted EGT setting or RPM etc (hopefully a anti seize function)
The SIP catalouge is fantastic even considered buying a Vespa at one point.
11111111 = 0xFF
-
- registered user
- Posts: 4823
- Joined: Tue Oct 25, 2011 9:50 pm
- Main scooter: Lambretta
- Location: Lanarkshire
- Contact:
Nice work on the speedo sensor, given me some ideas for fitting one on the front
"Our dilemma is that we hate change and love it at the same time; what we really want is for things to remain the same but get better."
- CutdownSpence
- registered user
- Posts: 85
- Joined: Sun Apr 21, 2013 3:02 pm
- Main scooter: 1966 Silver Special
- Location: Cyprus
- Contact:
Loving this scoot....proper job
One Of England's Finest Salad Dodger's.
- Scootissimo
- registered user
- Posts: 95
- Joined: Wed Jan 21, 2009 10:17 pm
- Location: IOW
- Contact:
Awesome scoot. Very envious.
Prefer the Snetty though. Just a personal thing.
And perhaps change the Indian switchgear....?????
Prefer the Snetty though. Just a personal thing.
And perhaps change the Indian switchgear....?????