side panel oil/tool holder
-
- Dealer
- Posts: 31
- Joined: Sat Jan 30, 2010 7:49 pm
- Main scooter: gp
- Location: southend
- Contact:
knocked this up over the christmas break , 321053843543 on ebay , photos not the best but ive found this very handy!
-
- Dealer
- Posts: 31
- Joined: Sat Jan 30, 2010 7:49 pm
- Main scooter: gp
- Location: southend
- Contact:
thanks mate! rubbish with computer stuff
-
- Dealer
- Posts: 31
- Joined: Sat Jan 30, 2010 7:49 pm
- Main scooter: gp
- Location: southend
- Contact:
Hi yes its made in a separate mould then bonded onto the panel so its part of the panelToddy wrote:Is it moulded into the Panel ??
-
- registered user
- Posts: 195
- Joined: Sun Jan 16, 2011 5:21 pm
- Main scooter: jet ts1
- Location: birmingham
- Contact:
lotta money for a box .....imho
never squat down when wearing spurs !!
-
- Dealer
- Posts: 31
- Joined: Sat Jan 30, 2010 7:49 pm
- Main scooter: gp
- Location: southend
- Contact:
£100 a lot of money for a set of side panels with (a box) built in ? could give stuff away i supposejoeswoonara wrote:lotta money for a box .....imho
-
- registered user
- Posts: 195
- Joined: Sun Jan 16, 2011 5:21 pm
- Main scooter: jet ts1
- Location: birmingham
- Contact:
sorry ......thought it was just for the box !
never squat down when wearing spurs !!
30 yrs ago we used to put something like this but in metal on the rear frame above the wheel i made about 20 for club members as i was a welder at the time .i noticed recently that someone had resurrected this idea and claimed it to be new ..................
id seen the idea on a scooter in Scarborough in 1982 and it wasnt new then
id seen the idea on a scooter in Scarborough in 1982 and it wasnt new then
We sleep soundly in our beds because rough men stand ready in the night to visit violence on those who would do us harm