Not trying to hijack this topic,but do you use any throttle cable elbow,on your TM 24?
I'm trying to find the best way to route the throttle cable.
Mikuni TM24
-
- registered user
- Posts: 202
- Joined: Mon Jan 12, 2009 4:06 pm
- Contact:
-
- registered user
- Posts: 200
- Joined: Wed Jan 07, 2009 1:13 pm
- Main scooter: Li150Special RT195
- Location: Ashford, kent
- Contact:
ditto....bazman wrote:No just let the cable loop into carb , running a remote filter though, so no air box in the way
and will try the 15 pilot at the weekend
thanks, guys....
Li150 S2 1959. Li150 Special 1964. GP125 1970. Jet 200 Performer 1981. 1967 Sx150. 1959 Li150 S1. 1968 li125 Series 4
-
- registered user
- Posts: 202
- Joined: Mon Jan 12, 2009 4:06 pm
- Contact:
I've just read this,bazman wrote:No just let the cable loop into carb , running a remote filter though, so no air box in the way
did the same thing earlier.
I also use a remote filter so there was plenty of room.
Cheers