Rear Footpeg Problem

Anything related to Lambrettas... ask tech questions, post helpful info, or just read and learn.
Bilko
registered user
Posts: 1346
Joined: Thu Jan 08, 2009 12:06 pm
Main scooter: LI150
Location: Belfast
Contact:

I've been getting by with these rear pillion footpegs, but the half nuts aren't enough to hold and the footpegs keep turning. As well as this the left hand bracket can't be fitted straight because of the flywheel cowling.

Anyone any ideas which would be the best way to tackle this? The engine bolt is the longer type for the larger left hand mount.

New footpegs & footpeg mounts would be ideal.


Image

Image
Bilko's Oily Blog

Directionally dysfunctional since 1966
Angry Bloke
registered user
Posts: 221
Joined: Thu Jan 29, 2009 1:45 pm
Location: Norwich
Contact:

What about a clamp around the mount ?
Je fettle - Tu fettle - Il fettle - Nous fettleons - Vous fettlez - Ils fettlent

"Broadsword calling Danny boy ,Broadsword calling Danny boy ,over "
Bilko
registered user
Posts: 1346
Joined: Thu Jan 08, 2009 12:06 pm
Main scooter: LI150
Location: Belfast
Contact:

I have 2 made for me by SLJ some time ago.

Not sure about how to sort pegs out though. :oops:


Image
Bilko's Oily Blog

Directionally dysfunctional since 1966
mark
registered user
Posts: 1547
Joined: Sat Jan 10, 2009 10:41 am
Contact:

drill and tap the block areas on you mounts and mount the pegs to it, put on mount so pegs are to the rear of bike
Bilko
registered user
Posts: 1346
Joined: Thu Jan 08, 2009 12:06 pm
Main scooter: LI150
Location: Belfast
Contact:

Good idea Mark, cheers. :)
Bilko's Oily Blog

Directionally dysfunctional since 1966
scooterjet
registered user
Posts: 58
Joined: Tue Jan 20, 2009 1:14 am
Main scooter: Lambretta Series 1 TS1
Location: Gloucester
Contact:

Couldn't you get a new,longer engine bolt made so you could fit full size nuts and simply space the left hand bracket away from the cowling?
Post Reply Previous topicNext topic
  • Information
  • Who is online

    Users browsing this forum: Google [Bot] and 19 guests