Just about to fit a 28mm phbh Dellorto to my stage 4 tuned GP200, i have a 42mm Clubman exhaust fitted and i'm needing some advice with regards to what are the best settings etc for jet's and set up etc.
cheers
28phbh Dellorto
- Andy Pickering
- registered user
- Posts: 2172
- Joined: Sun Jan 25, 2009 10:15 pm
- Main scooter: GP
- Location: Hull
- Contact:
Take a look through here Wally on lam set up http://scooterotica.org/forum/viewtopic.php?f=9&t=14
Ricspeed, gone but never forgotten RIP my friend #59
- Andy Pickering
- registered user
- Posts: 2172
- Joined: Sun Jan 25, 2009 10:15 pm
- Main scooter: GP
- Location: Hull
- Contact:
there should be loads of members with similar set ups around..dump the 28 and sling on a 30mm a few set up up for that.. or you could get it dynoed..?? you know its spot on then..
Ricspeed, gone but never forgotten RIP my friend #59
- Andy Pickering
- registered user
- Posts: 2172
- Joined: Sun Jan 25, 2009 10:15 pm
- Main scooter: GP
- Location: Hull
- Contact:
Scooterotica dyno centre (Housed in Sean Brady Scooters) in Ripon is not to far from the boro is it..good service..(but I would say that cause ive used it)
http://scooterotica.org/forum/viewtopic ... 12&t=12593
http://scooterotica.org/forum/viewtopic ... 12&t=12593
Last edited by Andy Pickering on Thu Sep 29, 2011 4:44 pm, edited 2 times in total.
Reason: added link
Reason: added link
Ricspeed, gone but never forgotten RIP my friend #59