Delly VHSH SET UP

Check here for a list of various carb set-ups to help with jetting and all aspects of carb trickery!
User avatar
Spursy
registered user
Posts: 36
Joined: Sat Sep 26, 2009 1:37 pm
Main scooter: Series 2 Bgm Race-Tour
Location: England and proud of it
Contact:

Been try a vhsh 30mm carb on me scoot , could not find any links to any set up for a 175cc and noticed a few other peeps been having probs with set up info , so i thought these links i found may be of help ,,, even if some are for go carts carb setting up is the same principle :roll:


Image

Image

http://www.conerel.com/Portals/0/Pdf%20 ... Manual.pdf

http://www.conerel.com/Portals/0/Pdf%20 ... ircuit.pdf

http://www.dellorto.com/editor/uploads/ ... tlevel.pdf

http://www.conerel.com/Portals/0/Pdf%20 ... ogress.pdf

http://www.conerel.com/Portals/0/Pdf%20 ... irflow.pdf

http://ekmpowershop2.com/ekmps/shops/re ... -469-p.asp


http://www.conerel.com/Portals/0/Pdf%20 ... ircuit.pdf
User avatar
Spursy
registered user
Posts: 36
Joined: Sat Sep 26, 2009 1:37 pm
Main scooter: Series 2 Bgm Race-Tour
Location: England and proud of it
Contact:

Image
User avatar
mawso
registered user
Posts: 411
Joined: Wed Jan 07, 2009 8:47 pm
Location: Harrogate
Contact:

What set up did you go with in the end for the 175 with this carb?

I have one jetted for an Imola and will use it on Stage 5 Suzuki 190...just wanted to see what your set up was to see the degree of difference between Imola set up.

Cheers Stu
User avatar
Spursy
registered user
Posts: 36
Joined: Sat Sep 26, 2009 1:37 pm
Main scooter: Series 2 Bgm Race-Tour
Location: England and proud of it
Contact:

took 175 kit off and put a 190 kit on mate ,, could not get the mid range set up correctly ,, so went back to 30 phb ,,,,,
Post Reply Previous topicNext topic
  • Information
  • Who is online

    Users browsing this forum: No registered users and 5 guests