TS1/JL4 PIPE

Check here for a list of various carb set-ups to help with jetting and all aspects of carb trickery!
User avatar
mickeyb
registered user
Posts: 63
Joined: Fri Jan 16, 2009 1:26 am
Location: Enniskillen
Contact:

looking for a starting point on the above with a 35 TMX Mikuni please...Thanks
User avatar
drunkmunkey6969
Moderator
Posts: 2838
Joined: Sun Jan 04, 2009 1:42 pm
Main scooter: '69 Lambretta GP
Location: North Yorkshire
Contact:

Every one is different, but you can start here.......20 pilot / 320 main / 57 needle, middle clip......and take it from there.
See our YouTube scooter channel for Tech-help: https://www.youtube.com/c/TheScooterFactory/videos
Bufficus
registered user
Posts: 271
Joined: Wed Jan 07, 2009 1:38 pm
Location: Chelmsford, Essex
Contact:

My TS1 230 with a very big exhaust port, widened boost and transfer feeds runs very lean with a JL4

Pilot 17.5-20
58 Needle top clip :o
320 Main

And its still too rich at 1/4 throttle.
Post Reply Previous topicNext topic
  • Information
  • Who is online

    Users browsing this forum: Google [Bot] and 10 guests