VHSH emulsion tube?

Check here for a list of various carb set-ups to help with jetting and all aspects of carb trickery!
Andy W
registered user
Posts: 144
Joined: Mon Jun 25, 2012 1:39 pm
Main scooter: GP 186 Imola
Location: Emsworth, Hampshire
Contact:

Hi guys can anyone tell me if I can run without the little emulsion tube fitted above the pilot jet? If so what effect would this have on the pilot jet sizing? Currently fitted 50 pilot, CD1 emulsion tube.
Cheers for any replies Andy
User avatar
garry inglis
registered user
Posts: 1298
Joined: Tue Jul 21, 2015 8:04 pm
Main scooter: ts1 230 and rb200
Location: darlington
Contact:

Yes you can I run two vhsh carbs one on my rb2oo with a normal pilot jet 42 and a 45 in my ts230 the emulsion tube helps starting and up to quarter throttle I've had both mine dynod and perfectly safe just check plug colour

Sent from my SM-A320FL using Tapatalk

Andy W
registered user
Posts: 144
Joined: Mon Jun 25, 2012 1:39 pm
Main scooter: GP 186 Imola
Location: Emsworth, Hampshire
Contact:

Cheers for the reply Garry, did you have to change (smaller/bigger size) the pilot to compensate for no emulsion tube?
User avatar
garry inglis
registered user
Posts: 1298
Joined: Tue Jul 21, 2015 8:04 pm
Main scooter: ts1 230 and rb200
Location: darlington
Contact:

I went from a 50 to a 42 without emulsion
User avatar
garry inglis
registered user
Posts: 1298
Joined: Tue Jul 21, 2015 8:04 pm
Main scooter: ts1 230 and rb200
Location: darlington
Contact:

Just to add with the 50 I didn't need choke to start with a 42 I need the choke
Andy W
registered user
Posts: 144
Joined: Mon Jun 25, 2012 1:39 pm
Main scooter: GP 186 Imola
Location: Emsworth, Hampshire
Contact:

Cheers Garry this is for my race RB20 race engine in the BSSO Production Class, new jets have been ordered.
User avatar
garry inglis
registered user
Posts: 1298
Joined: Tue Jul 21, 2015 8:04 pm
Main scooter: ts1 230 and rb200
Location: darlington
Contact:

My mate Barry one last year and he is coming back next year
User avatar
corrado
Dealer
Posts: 2588
Joined: Thu Jan 08, 2009 1:12 am
Main scooter: Lambretta GP
Location: Top of Blackpool Tower
Contact:

Andy W wrote: Wed Aug 02, 2017 7:48 am Cheers Garry this is for my race RB20 race engine in the BSSO Production Class, new jets have been ordered.
What jetting did you finish up using Andy on the RB20 race engine? I'd like to try a VHSH over the PHBH currently on my RB.
Andy W
registered user
Posts: 144
Joined: Mon Jun 25, 2012 1:39 pm
Main scooter: GP 186 Imola
Location: Emsworth, Hampshire
Contact:

Martin, sorry for the delay in replying. I have sent you a PM with settings after Cadwell Park races, hope they help.
Andy
Post Reply Previous topicNext topic
  • Information
  • Who is online

    Users browsing this forum: No registered users and 9 guests