Monza 225 phbh 30 and tsr evo exhaust

[Bensmith225]

Running a monza 225 phbh 30 and a tsr evo exhaust, pulls clean but the cht seems high to me (between 130-145'C). I'm running 50 slide 55 idle av266 atomiser x2 needle (second clip down) and a 142 main. Does this sound about right. Tried different atomisers and clip positions and they're all too rich so this setup seems to work. Is it worth upping the main to bring the temperature down


Sent from my iPad using Tapatalk

[bazza3004]

Have you tried a 40 slide. I ran a TS 230 (yeh i know that aint a monza) on the x13 av266 with no issues temp wise. Hope this helps.

[Bensmith225]

Yeah I have, I could never get it to run right with a 40 slide


Sent from my iPad using Tapatalk

[Boreham]

Hi Ben, the recommended slide for the Monza is much leaner, 50 slide

[soulsurfer]

Running a monza 225 phbh 30 and a tsr evo exhaust, pulls clean but the cht seems high to me (between 130-145'C). I'm running 50 slide 55 idle av266 atomiser x2 needle (second clip down) and a 142 main. Does this sound about right. Tried different atomisers and clip positions and they're all too rich so this setup seems to work. Is it worth upping the main to bring the temperature down


Sent from my iPad using Tapatalk

Depends on what throttle position it's getting hot, have you considered an adjustable power jet?


Sent from my iPad using Tapatalk

[Bensmith225]

It's between half and full throttle, I don't like running power jets


Sent from my iPad using Tapatalk