Reed mount quattrini - what carb to use?

Check here for a list of various carb set-ups to help with jetting and all aspects of carb trickery!
User avatar
scootnz
registered user
Posts: 3
Joined: Sat Nov 14, 2015 3:46 am
Main scooter: Vespa Super
Contact:

Hi, we are trying to set up a rear facing carb on a quattrini M1XL.

We have tried to fit a Dellorto PHBH 30mm to the stock reed mount, but it won't fit.

Is there a special manifold rubber to suit Dellorto style carbs? Or is there an alternate solution for the manifold?

This is for an event scooter for an April 2016 event - would love to get it road tested well before then!

Hope someone can help with good advice.

Jess
User avatar
wack 63
registered user
Posts: 1254
Joined: Fri Nov 27, 2009 9:33 pm
Main scooter: '71 GP TS1
Location: Lincs
Contact:

cartmel808
registered user
Posts: 467
Joined: Tue Feb 04, 2014 10:35 am
Main scooter: 1975 Vespa Rally 200 Femsa
Location: Durham, England
Contact:

I use a Delly PHBH 30 on mine & it fits the standard Quattrini manifold without any problem... think I used one of the SIP Serie Pro manifold rubbers for 30mm carb - like this one; http://www.sip-scootershop.com/en/produ ... +_22301500

ImageUntitled by Graham Dent, on Flickr
User avatar
scootnz
registered user
Posts: 3
Joined: Sat Nov 14, 2015 3:46 am
Main scooter: Vespa Super
Contact:

thanks, apparently that special manifold came with the kit, but it got sold to someone else who needed it! We'll track one down and try it.

Sent from my Nexus 7 using Tapatalk
Post Reply Previous topicNext topic
  • Information
  • Who is online

    Users browsing this forum: No registered users and 9 guests