Can anyone offer a starting point for jetting?
cheers
Mugello V4 small block, Mikuni TM24
-
- registered user
- Posts: 545
- Joined: Wed Jan 07, 2009 7:46 pm
- Xbox live gamer tag: Pleasure Master
- Main scooter: lambretta gp150
- Location: Gold Coast Queensland Australia
- Contact:
How come phonetics isn't spelt with an 'f'?
Check out my boobs! <-- <--Just imagine being burried between those puppies!
Check out my boobs! <-- <--Just imagine being burried between those puppies!
-
- registered user
- Posts: 545
- Joined: Wed Jan 07, 2009 7:46 pm
- Xbox live gamer tag: Pleasure Master
- Main scooter: lambretta gp150
- Location: Gold Coast Queensland Australia
- Contact:
Bump
How come phonetics isn't spelt with an 'f'?
Check out my boobs! <-- <--Just imagine being burried between those puppies!
Check out my boobs! <-- <--Just imagine being burried between those puppies!
-
- registered user
- Posts: 12
- Joined: Wed Jan 07, 2009 11:08 pm
- Main scooter: italian gp 125
- Location: hornchurch essex
- Contact:
hi i have a mugello v5 i think the latest one with a tm24 and i have a 175 open carb in mine dyno at jahspeed not sure on the clip position the needle was the one that came with itred ghost wrote:Can anyone offer a starting point for jetting?
cheers
send me a email address and i will send you a copy of the dyno if you want
-
- registered user
- Posts: 12
- Joined: Wed Jan 07, 2009 11:08 pm
- Main scooter: italian gp 125
- Location: hornchurch essex
- Contact:
indian gp 200 standard sprockets 47x18 JL3Craig H wrote:Hi
What gearing you using and what pipe?
-
- registered user
- Posts: 12
- Joined: Wed Jan 07, 2009 11:08 pm
- Main scooter: italian gp 125
- Location: hornchurch essex
- Contact:
i tried a filter on mine with a 175 main and it was too richCraig H wrote:Cheers same here running a filter with a 170 main
mine is a bit juddery driving slow will have to play a bit more thanks
-
- registered user
- Posts: 12
- Joined: Wed Jan 07, 2009 11:08 pm
- Main scooter: italian gp 125
- Location: hornchurch essex
- Contact:
16.59@6988 rpm torque 12.9 @6657 rpmCraig H wrote:I use a 15 pilot in mine ok low down and second clip down from top. What bhp and torque did yours make? Mine was 16 bhp 12-13 torque