Got a 1981 Vespa 100 (douglas) to fix up.
It's got a couple of missing parts. Shoulkd it have a plastic or metal cylinder head cowling?
Should it have a coil or CDI and regulator?
What parts are needed to make complete throttle internals?
What colours was this model originally made in?
Cheers,
Ian
Vespa 100
-
- registered user
- Posts: 8
- Joined: Mon Apr 14, 2014 12:15 pm
- Main scooter: lambretta 125 series 2 TS1
- Contact:
-
- registered user
- Posts: 1208
- Joined: Sat Mar 28, 2009 1:10 pm
- Location: hartlepool
- Contact:
Hi
You would be best on the smallframe forum.
They are dedicated to smallies and very helpful.
From my limited knowledge ;
It would have a plastic cowl.
It would have been points not electronic ignition
Parts book (or even the Haynes) manual will show you what you need... Off the top of my head I can't remember.
Sorry I'm blank on the colours
I'm working up a PK at the moment.
Gaz
You would be best on the smallframe forum.
They are dedicated to smallies and very helpful.
From my limited knowledge ;
It would have a plastic cowl.
It would have been points not electronic ignition
Parts book (or even the Haynes) manual will show you what you need... Off the top of my head I can't remember.
Sorry I'm blank on the colours
I'm working up a PK at the moment.
Gaz