Page 1 of 1

vespa t5 MK1 headset screen change

Posted: Mon Oct 12, 2020 9:57 pm
by boxofbits
how do you change the screen blade on a MK1 vespa t5 had plenty of p ranges whick is a few bolts underneath for top to pop off but this just look like some self tappers do they hold all the sections together do I just undo them or can I just unclip the black Speedo bit from the top :oops:

Re: vespa t5 MK1 headset screen change

Posted: Sun Oct 18, 2020 9:16 am
by gaz_powell
It's a while since I did a T5, but from memory yes all the self tappers out and dismantle.
Don't forget to push the speedo cable up from the bottom to give play on the speedo