Seat on P200e - the long one

Anything related to Vespas... ask tech questions, post helpful info, or just read and learn.
railfancwb
registered user
Posts: 138
Joined: Tue Oct 27, 2015 3:51 am
Contact:

Tue Sep 08, 2020 1:49 am

At the front of the long seat on my P200e there is a hinge. There is a plate on that hinge which has a large air hole and three bolt holes. What do those three bolts fasten to? Loose nuts which could drop down toward the carburetor if the bolts are carelessly removed? Or threaded areas made part of the chassis?

Thanks!

Representative seat...

https://www.ebay.com/itm/274306106046

Norrie Bodge
registered user
Posts: 433
Joined: Thu Oct 25, 2012 2:49 am
Main scooter: GP-1971-Ts230/S2-1960-Ts230
Contact:

Tue Sep 08, 2020 2:05 am

Threaded chassis m8, no loose nuts

railfancwb
registered user
Posts: 138
Joined: Tue Oct 27, 2015 3:51 am
Contact:

Sat Sep 12, 2020 2:11 am

Thanks for the information about seat attachment. Swapped the old one for a better condition one today.

Post Reply Previous topicNext topic
  • Information
  • Who is online

    Users browsing this forum: No registered users and 2 guests

cron