VBB 10" wheel conversion
How do I go about a 10" wheel conversion on a 150 VBB? Do I just fit PX forks and a PX engine?
-
gaz_powell
- registered user
- Posts: 1208
- Joined: Sat Mar 28, 2009 1:10 pm
- Location: hartlepool
- Contact:
I'm sure sip make an 8 to 10" conversion retaining the existing hubs
-
railfancwb
- registered user
- Posts: 138
- Joined: Tue Oct 27, 2015 3:51 am
- Contact:
If you have a speedometer/odometer driven from the front wheel you will need to deal with that.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
-
railfancwb
- registered user
- Posts: 138
- Joined: Tue Oct 27, 2015 3:51 am
- Contact:
Rough measuring...
8” tire 39” circumference
10” tire 53” circumference
30mph with 8” tire approximately 41mph with 10” tire.
Sent from my iPhone using Tapatalk
8” tire 39” circumference
10” tire 53” circumference
30mph with 8” tire approximately 41mph with 10” tire.
Sent from my iPhone using Tapatalk
-
pheasant plucker
- registered user
- Posts: 5
- Joined: Mon Oct 29, 2018 11:30 pm
- Main scooter: VBB P200
- Contact:
PK fork is for disc conversion. Will give small leftward misalignment (2-4mm standard). Re-fitting the mudguard is a pitfa - honestly the hardest part of going down that path.
Can get conversion hubs for VBB motor and front if discs and P200 aren’t ‘required’. Think you can even get speedo drive conversions also.
Can get conversion hubs for VBB motor and front if discs and P200 aren’t ‘required’. Think you can even get speedo drive conversions also.
