Page 1 of 1

REV COUNTER FOR A PX, NOT SIP.

Posted: Mon Jan 28, 2019 1:46 pm
by eibargum
Anyone found one that works and doesn't brake the bank.

Re: REV COUNTER FOR A PX, NOT SIP.

Posted: Mon Jan 28, 2019 6:35 pm
by Martin20
Hi eibargum,
Bought one of these a couple of weeks ago. Works a treat up to press! Battery operated, which is not replaceable, but read it will last approx 3 years!

https://www.ebay.co.uk/itm/Spark-Plugs- ... SwCMFaOm5L

Fits nicely on top of toolbox, and plenty of wire to reach HT lead. (tucked my wire inside legshield/floor runner.)

Re: REV COUNTER FOR A PX, NOT SIP.

Posted: Mon Jan 28, 2019 7:44 pm
by eibargum
I bought one a couple of weeks ago Martin but it wont work in Rev Counter mode for some reason so iam looking for something else, ideally a round one I could sink into the top of the toolbox.

Re: REV COUNTER FOR A PX, NOT SIP.

Posted: Mon Jan 28, 2019 8:34 pm
by Martin20
Do you think you could have got a duff one? I have one on my P200, (as above), and have bought another for my Lambretta, which I have tested, and it worked, but have not yet fitted permanently!
I appreciate they are just cheap, short term fix, so will follow this thread with interest to see what others have fitted.
Martin

Re: REV COUNTER FOR A PX, NOT SIP.

Posted: Wed Jan 30, 2019 1:00 pm
by eibargum
If I cant find better I might go for this one Martin. https://www.ebay.co.uk/p/SEARON-Backlit ... 3313319548

Re: REV COUNTER FOR A PX, NOT SIP.

Posted: Wed Jan 30, 2019 3:10 pm
by Martin20
👍 Cheers! I'll keep that in my 'watch' list.