polini 210 help

Anything related to Vespas... ask tech questions, post helpful info, or just read and learn.
p2nm
registered user
Posts: 11
Joined: Sat Feb 18, 2017 12:57 pm
Main scooter: p2
Contact:

Hi all

just purchased the latest polini 210 kit,is any body else running one that coud give me help with timing,jetting etc
to start i will running standard 24/24 carb with sip road exhaust.
any help appreciatted
User avatar
drunkmunkey6969
Moderator
Posts: 2838
Joined: Sun Jan 04, 2009 1:42 pm
Main scooter: '69 Lambretta GP
Location: North Yorkshire
Contact:

You still running standard jetting?


Sent from my iPhone using Tapatalk
See our YouTube scooter channel for Tech-help: https://www.youtube.com/c/TheScooterFactory/videos
p2nm
registered user
Posts: 11
Joined: Sat Feb 18, 2017 12:57 pm
Main scooter: p2
Contact:

hi
was looking to up the main jet to around the 128 mark,was interested in what others were running that plus timings

cheers
User avatar
drunkmunkey6969
Moderator
Posts: 2838
Joined: Sun Jan 04, 2009 1:42 pm
Main scooter: '69 Lambretta GP
Location: North Yorkshire
Contact:

Set timing to 18 (IT mark) check what pilot, atomiser, air corrector and main are.

I


Sent from my iPhone using Tapatalk
See our YouTube scooter channel for Tech-help: https://www.youtube.com/c/TheScooterFactory/videos
p2nm
registered user
Posts: 11
Joined: Sat Feb 18, 2017 12:57 pm
Main scooter: p2
Contact:

cheers mate
jets in the carb at present are 55/160 pilot /be3 atomiser/air corrector 160 was looking for advice on main as polini say 120 -125 which i thought would be on the lean side from what others have said,will the head bolts torque setting be the same as the cast iron kit?

thanks
eibargum
registered user
Posts: 368
Joined: Wed Jan 07, 2009 6:38 pm
Main scooter: Vespa PX210 Polini
Contact:

What carb settings did you end up with.
Post Reply Previous topicNext topic
  • Information
  • Who is online

    Users browsing this forum: No registered users and 10 guests