My 1980 Vespa P200e turn signals...

Anything related to Vespas... ask tech questions, post helpful info, or just read and learn.
railfancwb
registered user
Posts: 138
Joined: Tue Oct 27, 2015 3:51 am
Contact:

I got the turn signals working properly on my 1980 Vespa P200e, including the indicator light by the speedometer. Even with the indicator light I still tend to forget to turn the signal light off.

I am thinking about putting a buzzer into the circuit to help me remember.

Image
A picture showing the location of the flasher behind the battery position.

Image
Portion of wiring schematic showing indicator light (5) and flasher (15).

So my questions...

1) put the buzzer in the dashed red wire between the flasher and the indicator light?

2) is there a better place to put the buzzer than near the flasher behind the spare and battery?

3) was there a variation of the P series which came with a buzzer and if so where was tha buzzer placed?

Thanks!


Sent from my iPhone using Tapatalk
Lambretta67
registered user
Posts: 303
Joined: Fri Mar 30, 2018 5:02 pm
Main scooter: Lambretta L.I. 200 special
Location: Newbury
Contact:

I think the first T5's had a buzzer. People disconnected them as they were annoying
gaz_powell
registered user
Posts: 1208
Joined: Sat Mar 28, 2009 1:10 pm
Location: hartlepool
Contact:

T5 mk 1 featured a buzzer, mounted inside the glove box top right of the door.
Have a look on SIP website they will probably have one which will give you an idea.
Pretty simple to break into the indicator wiring.
Gaz
railfancwb
registered user
Posts: 138
Joined: Tue Oct 27, 2015 3:51 am
Contact:

Thanks!


Sent from my iPhone using Tapatalk
Post Reply Previous topicNext topic
  • Information
  • Who is online

    Users browsing this forum: No registered users and 5 guests