Kingwelle 64mm crank

Anything related to Vespas... ask tech questions, post helpful info, or just read and learn.
User avatar
hungdog
registered user
Posts: 229
Joined: Wed Sep 16, 2009 2:57 pm
Contact:

Tue Jan 23, 2018 6:33 pm

Anyone know if any alterations are required to the casings when fitting a 64mm crank ?

User avatar
garry inglis
registered user
Posts: 1234
Joined: Tue Jul 21, 2015 8:04 pm
ebay user ID: garry52uk
Main scooter: ts1 230 and rb200
Location: darlington
Contact:

Tue Jan 23, 2018 7:13 pm

depends wich crank you use to how deep a groove is needed as some cranks big end runs insde the webs and others protrude

User avatar
hungdog
registered user
Posts: 229
Joined: Wed Sep 16, 2009 2:57 pm
Contact:

Tue Jan 23, 2018 7:53 pm

Vespa Kingwelle 64mm crank for P2 more worried about web size and possibly having to machine cases to fit webs than worrying about the rod making contact.

Ginch
registered user
Posts: 139
Joined: Fri Jan 03, 2014 9:20 am
Main scooter: Vespa 150 Super
Contact:

Tue Jan 30, 2018 8:10 am

They are usually pretty quick to reply on Facebook, worth asking them.

User avatar
hungdog
registered user
Posts: 229
Joined: Wed Sep 16, 2009 2:57 pm
Contact:

Tue Mar 06, 2018 6:12 pm

:ugeek: Kingwelle's reply

The motor has to be spindled up to 100.00mm , the crank diameter is 99.3mm

Post Reply Previous topicNext topic
  • Information
  • Who is online

    Users browsing this forum: No registered users and 1 guest