Page 2 of 3

Re: PX200 tuning

Posted: Tue Oct 10, 2017 9:33 am
by Norrie Bodge
Yes chippers!!
I remember fitting the topend after he seized it up but sure it was just all standard ?

Re: PX200 tuning

Posted: Thu Jan 11, 2018 3:18 pm
by RGC GEOFF
Here are some pics of my stage 4

Image

Image

Image

Image

Image

Re: PX200 tuning

Posted: Thu Jan 11, 2018 8:16 pm
by Adam_Winstone
I love the crown work for additional transfer timing :)

Re: PX200 tuning

Posted: Fri Jan 12, 2018 1:12 am
by paul d
Like the lightened clutch and the filling in of the transfers, barrel painted black, the small details. Work of art!

Re: PX200 tuning

Posted: Fri Jan 12, 2018 8:54 am
by RGC GEOFF

Re: PX200 tuning

Posted: Fri Jan 12, 2018 6:11 pm
by Norrie Bodge
Who did the tuning 4u Geoff?
& what does it perform likes?

What’s your full setup??

Re: PX200 tuning

Posted: Fri Jan 12, 2018 7:46 pm
by RGC GEOFF
I do all the engines myself Norrie.
Performs for the moment I don't know; I finished the engine last week and my frame is not ready yet, still at the paint job.

set up is on a SI 24/24 E : idle 60/160
air corrector 140
Atomiser BE1
Main jet 138
Slide n°4 old model without pocket.

air filter p200 non drilled but will be replaced by T5 's one + Pinasco airbox

Exhaust will be a Sterling 200

Re: PX200 tuning

Posted: Fri Jan 12, 2018 8:36 pm
by Norrie Bodge
RGC GEOFF wrote: Fri Jan 12, 2018 7:46 pm I do all the engines myself Norrie.
Performs for the moment I don't know; I finished the engine last week and my frame is not ready yet, still at the paint job.

set up is on a SI 24/24 E : idle 60/160
air corrector 140
Atomiser BE1
Main jet 138
Slide n°4 old model without pocket.

air filter p200 non drilled but will be replaced by T5 's one + Pinasco airbox

Exhaust will be a Sterling 200
im impressed m8, sounds & looks good ;-)
done a few bits of tuning on me own P200E over the years.
be great if you can add how it goes once all built & ran in m8

Re: PX200 tuning

Posted: Sat Jan 13, 2018 11:48 am
by RGC GEOFF
No problem, I will.

Re: PX200 tuning

Posted: Fri Mar 02, 2018 12:35 pm
by Norrie Bodge
@ RGC GEOFF .... any further reports to how this P2 tune performs mate ?