Whilst out minding my own business during the week, I had a "moment" on my LML.
It is a 125 Star 2 stroke on a 60 plate. whilst on a big roundabout on a dual carriageway, it nipped up, the back end stepped out, and my life flashed before me
Anyway, upon stripping the top end today, I have found that the big end has seized solid.
The question is, can anyone recommend a decent replacement for the crank, and the clutch. I don't want another LML crank with bearings made of cheese, and the clutch grabs like a b@5t@rd, so I need that sorting out as well.
I have the factory 5 port 150 barrel fitted, so for an everyday commuter it goes well, I just need to sort the lack of reliability out.
Oh, and cheers to Holty who has stepped up again to sort the rebuild for me
LML Crank
- Muttley McLadd
- registered user
- Posts: 1496
- Joined: Wed Jan 07, 2009 6:32 pm
- Contact:
I put one of the super flash Serie Pro ones in mine. Admittedly, mine's a 60 mil one. But i'm sure their 57 mil ones are also good.
Mine was really smooth, straight out the box.
Mine was really smooth, straight out the box.
CakeAndArseParty
-
- registered user
- Posts: 1208
- Joined: Sat Mar 28, 2009 1:10 pm
- Location: hartlepool
- Contact:
just buy a standard piaggio, mec or mazzachelli, rebuild the clutch properly or buy a off the shelf cosa type - you don't need anything more than that.
good luck
good luck