Scooterotica

Hi FF
Great too here u fit n well & 2see you posting again more great tuning work that you’ve done

Thanks Norrie Bodge. Hard time working. I'm less on forum and more posting on fb under my "nom de plume" Marcel Audiard
https://www.facebook.com/groups/107236579867807

Don't hesitate to visit my page and ask me question. My wife is an English teacher!

I,ve gone and bought one of the Pinasco 225 kits for the ss180 engine since first posting on here , does anybody have any experience of fitting these , ie what carb to use , what exhaust etc are there any pitfalls to avoid etc , thanks

Much too much compression on this 225 kit. Hard to get kickstarted.
Use a SI 24mm mm and this marvelous air box kit done for the SI:

https://www.facebook.com/marketplace/it ... &refType=0

SI 24mm ? the standard ss180 runs a 27mm carb ? also what do you mean by " marvelous air box kit " and was hoping to get round the compression by lowering it with 2 head gaskets ???

SS carb is 27/23...
link to the airbox in the previous message
2 gaskets will waste the squish clearance...