lml indicators wont flash

Anything related to Vespas... ask tech questions, post helpful info, or just read and learn.
holty
registered user
Posts: 908
Joined: Wed Jul 15, 2015 11:52 pm
Main scooter: lambretta gp
Location: east yorkshire
Contact:

hi folks, got a mate his lml indicators come on but wont flash, lights work ok, battery charged, thinking it could be the flasher relay?
Nerdy Norm
registered user
Posts: 238
Joined: Tue Dec 18, 2012 6:47 pm
Main scooter: Lambretta LI 150 S3
Location: Belgium
Contact:

Nope, it's either an earth or the switch. Loads of info on the LML forum and FB page.
Lambretta LI125 Series 2, Lambretta LI150 Series 3, Lambretta J100 Cento, LML Star 150 2T
Tony Hart
registered user
Posts: 37
Joined: Thu Oct 20, 2011 10:12 pm
Main scooter: Lambretta S2
Contact:

Check the connections on the back of the switch. Quite common for wires to break away on these.
GBCS
registered user
Posts: 194
Joined: Fri Feb 25, 2011 9:46 pm
Main scooter: Lambretta GP RB250
Location: Hull
Contact:

Tony Hart wrote:Check the connections on the back of the switch. Quite common for wires to break away on these.
Bang on Tony, the wires had corroded off the back of the switch. All sorted :D cheers
Tony Hart
registered user
Posts: 37
Joined: Thu Oct 20, 2011 10:12 pm
Main scooter: Lambretta S2
Contact:

It's the dodgy Bangalore soldering!
Nerdy Norm
registered user
Posts: 238
Joined: Tue Dec 18, 2012 6:47 pm
Main scooter: Lambretta LI 150 S3
Location: Belgium
Contact:

It's the dodgy Bangalore soldering!
You're only 2000km out ;)
Lambretta LI125 Series 2, Lambretta LI150 Series 3, Lambretta J100 Cento, LML Star 150 2T
Tony Hart
registered user
Posts: 37
Joined: Thu Oct 20, 2011 10:12 pm
Main scooter: Lambretta S2
Contact:

Nerdy Norm wrote:
It's the dodgy Bangalore soldering!
You're only 2000km out ;)
Kanpur soldering didn't have quite the same ring to it :D
Post Reply Previous topicNext topic
  • Information
  • Who is online

    Users browsing this forum: No registered users and 23 guests