Does anyone have experience/recommendations for a good small frame clutch on a tuned motor.
Building a Polini EVO running which should be aprx 18-20bhp (7500-8k revs)
I have the FA 6 spring unit, SIP do a race set of carbon plates and springs (green), no rating on what this will take.
Cheers
Small frame Clutch
-
225worb
- registered user
- Posts: 137
- Joined: Tue Apr 28, 2009 6:09 pm
- Main scooter: Vespa 225, Falc , 230 S2
- Contact:
Xl2 clutch set up with carbon plates and stronger springs....
18-20 brake shouldnt need anything to expensive or trick....It does depend of course how much your going to abuse it tooo ...........Loads i hope..
My old polini tuned grass track/sprint machine used a single centre spring BUT made from square steel ( polini i think) and worked great with standing larges amounts of abuse !!!!
18-20 brake shouldnt need anything to expensive or trick....It does depend of course how much your going to abuse it tooo ...........Loads i hope..
My old polini tuned grass track/sprint machine used a single centre spring BUT made from square steel ( polini i think) and worked great with standing larges amounts of abuse !!!!