Long Conrods

[OzOAP]

Full circle webs from Taffspeed, rod from MB, crank pin made from a Jack Knight Mini idler gear pin, rod shims are from Mini idler gear, I made the web packers.
Just had a look at LTH site. f@@k me that would have saved a lot of work if they had done it 15 years ago!!

[grimspeed]

What do you think is the best reedblock at the moment ?

[OzOAP]

I've got Tassinari V-Force in everything I have reed valved.
Reeds are just like tyres and two stroke oil though...ask 5 different people and get 6 answers.

[sean brady scooters]

What do you think is the best reedblock at the moment ?

Imo I think the new malossi reedblock ,part no 7315550 is the best yet

[grimspeed]

I take it your getting good results on the dyno from these ?

[grimspeed]

Parts here from LTH ! Now I need to decide what crank 57 or 60 . Can a head be machined for me if the piston is say a mm proud of the top of the cylinder ? Sean ?
If so it looks like a 60mm bell crank ! If not then its some configuration of 57mm !

[vesbrettas]

i think most 60 cranks use a 20mm pin not 22mm

[grimspeed]

i think most 60 cranks use a 20mm pin not 22mm

Soon find out ! The question has been asked !

[grimspeed]

Looks like your right ! But its ok I can get a pin 20mm x 49mm and theres a conrod 115mm long for a 20mm pin and 18mm small end in Worbs shop !
So all is good ! Nobody seams to sell the wide spacers for a 20mm pin though but I can make them myself out of bronze !

[grimspeed]

60mm bell crank it is then !
http://www.wasp-performance.co.uk/onlin ... X200E.html
http://www.lambretta-teile.de/Big-end-p ... o-Vespa-T5
http://www.vespa-lambretta-teile.com/Na ... -und-18-mm
http://www.wasp-performance.co.uk/onlin ... 150cc.html
I have been very naughty today ! Please don't tell the wife !
Sorted !