P200E Gear Selector
Anyone know if the selector rod is different on these to later PX? Been jumping out of third but had a new cruciform fitted. Also had 2 x DRT spacers fitted with gaskets when I took it apart. Just wondering why it would need the spacers fitting am assuming maybe wrong rod fitted, anyone any ideas? Cheers
-
gaz_powell
- registered user
- Posts: 1208
- Joined: Sat Mar 28, 2009 1:10 pm
- Location: hartlepool
- Contact:
yes they are different for early gearbox (shaped cruciform) as opposed to the late EFL (flat cruciform) type
-
hobospeed
- registered user
- Posts: 76
- Joined: Wed Jan 07, 2009 5:38 pm
- Location: Vancouver B.C.
- Contact:
The reason for the spacers is explained here:
http://www.sip-scootershop.com/en/produ ... +_92223000
http://www.sip-scootershop.com/en/produ ... +_92223000