sip speedo for px - no horn

[MCH]

A bit of a electricery problem, iv fitted a sip digi speedo to my px but now my horn won't work properly, the digi speedo seems to be eating all the power, like I get a bit of a horn but it sounds like it's being strangled , iv checked the output and it seems to be about 5 or 6 volts coming to the horn, if I turn an indicator on while it's running, I won't get any sound at all, with the engine off I get no horn even though I still have a battery connected, but I have disconnected the elecy start at the relay end. Any ideas?

someone told me they had heard of this before but couldn't remember where they saw a thread or on which forum to sort the problem

[firekdp]

Have you checked the fuse?
And which wires did you disconnect at the relay?

[joeythescooterboy]

Flat battery?

[MCH]

the brown fuse is intact, no problems with it, I will double check the connections though and try another just in case

battery is brand new, I tried another battery and still nothing, both are charged

I disconnected the black wire from the yellow relay which feeds to the electric start,

the horn worked fine before fitting the sip speedo with the above the same

[MCH]

sorted it,

wires to fuse were the wrong way around

[firekdp]

sorted it,

wires to fuse were the wrong way around

Bit strange as, if the fuse was intact, it wouldn't make a blind bit of difference where they went. As the fuse is just a link, all wires are connected together.
Even so, if it was working before, who changed them?