Malossi mhr 210 kit

Anything related to Vespas... ask tech questions, post helpful info, or just read and learn.
Jack221
registered user
Posts: 214
Joined: Mon Jul 29, 2013 8:18 am
Main scooter: PX221
Location: London
Contact:

Sun Mar 30, 2014 3:59 pm

Cominig on power at 5500rpm you would already need to redline 3rd to pull 4th. I think 126 degrees is about the road rideable limit for the PX200 gearbox(with t5 4th). Any more and you begin to lose too much bottom end pull. And as joked about earlier, with a longer duration than 126 the peak power on the dyno does increase but the scooter wont ride so well on the road, as the power band will be too narrow for a motor with only 4 gears.
And with 138/198 you would need to think about a 50 Special gearbox!
Vespa est ieiunas, quia semper operaturi

santacama
registered user
Posts: 119
Joined: Mon Feb 02, 2009 8:10 pm
Location: Sevilla (Spain)
Contact:

Sun Mar 30, 2014 4:25 pm

Looks like the new exhaust are a magic wand (Nordspeed, Pipedeing, S & S, ....)

Polossi220
registered user
Posts: 41
Joined: Sun Feb 15, 2009 6:11 pm
Main scooter: Vespa PX220
Location: Dundee Scotland
Contact:

Fri Apr 04, 2014 5:24 pm

Malossi mhr kit turned up looks nice
tried base gasket against casings not any different than previous kit ????
Tried base gasket against cylinder it doesn't match £300 on a new kit and they supply old stock base gaskets !!!!
Only in the world of scootering hahaha

MattsDad
registered user
Posts: 78
Joined: Sat Jan 17, 2009 2:21 am
Contact:

Mon Apr 07, 2014 11:31 pm

Please would someone just shut up!
This thread and many others; if want to feck up or compromise own engine then fine but keep posting this nonsense, others will believe it to be true!
Said it, been bugging me, not even had a drink! :D
Before you ask.....don't ask.
COCKSPEED TUNING

santacama
registered user
Posts: 119
Joined: Mon Feb 02, 2009 8:10 pm
Location: Sevilla (Spain)
Contact:

Tue Apr 08, 2014 7:32 am

MattsDad wrote:Please would someone just shut up!
This thread and many others; if want to feck up or compromise own engine then fine but keep posting this nonsense, others will believe it to be true!
Said it, been bugging me, not even had a drink! :D
Before you ask.....don't ask.
Since you didn't specify, could you please say who you are telling to shut up?
Thanks.

225worb
registered user
Posts: 137
Joined: Tue Apr 28, 2009 6:09 pm
Main scooter: Vespa 225, Falc , 230 S2
Contact:

Tue Apr 08, 2014 7:56 pm

Cockspeed what part of the thread don't you agree with dude,
Looking forward to receiving my replacement Cylinder head by the way 8-)

225worb
registered user
Posts: 137
Joined: Tue Apr 28, 2009 6:09 pm
Main scooter: Vespa 225, Falc , 230 S2
Contact:

Mon Apr 14, 2014 9:14 pm

Still no response... oh well !!!
Back to the point ,,,
Ive just replaced my water cooled cylinder head for a SIP item ..... F**k what a difference!!! Mine was modified to suite a Malossi cylinder but has had some battle scars and casting marks but the new billet one ive fitted has transformed my machine even more...
Ive managed to put some more miles on it and pretty happy with MY RUNNING in .....now for the fun to begin.....race anyone :lol:
....

santacama
registered user
Posts: 119
Joined: Mon Feb 02, 2009 8:10 pm
Location: Sevilla (Spain)
Contact:

Mon Apr 14, 2014 11:30 pm

Is the SIP head water cooled too?
Do you have 60 or 57 crank?

Regards.

225worb
registered user
Posts: 137
Joined: Tue Apr 28, 2009 6:09 pm
Main scooter: Vespa 225, Falc , 230 S2
Contact:

Tue Apr 15, 2014 9:00 pm

Yes it is... wasn't really looking for one as mine was doing the job BUT just happened to find one ..
Im running the serie pro reed crank and ive welded the big end pin just in case !!!!!! :o

santacama
registered user
Posts: 119
Joined: Mon Feb 02, 2009 8:10 pm
Location: Sevilla (Spain)
Contact:

Sat Apr 19, 2014 12:09 am

Is it a 60 mm stroke crank?

Post Reply Previous topicNext topic
  • Information
  • Who is online

    Users browsing this forum: No registered users and 4 guests

cron