Does anyone here drive the BGM Big Box on a standard P2 engine?
The test in Scootering sounded quite impressive. Or did anyone here face any problems (fitting/build quality)?
Cheers, Chris
BGM Big Box
-
- registered user
- Posts: 156
- Joined: Fri Jan 09, 2009 11:14 am
- Main scooter: Lambretta GP Monza 225
- Location: Livingston
- Contact:
I'm interested to hear too, thinking of taking my Taffy pipe off my malossi 210, but need to know that it's a good un as the Taffy works great just now.
The Big Box looked great against the other std look exhausts, but it would be good to see a chart of the same bike fitted with an expansion for comparison. Torque/Bhp etc
The Big Box looked great against the other std look exhausts, but it would be good to see a chart of the same bike fitted with an expansion for comparison. Torque/Bhp etc
Not read the article yet.
Two other barrels to test first but I'll stick a graph up in a few weeks for a touring Malossi with JL v BGM.
Already made my mind up for this year though with the BGM, so quiet and performs too.
Two other barrels to test first but I'll stick a graph up in a few weeks for a touring Malossi with JL v BGM.
Already made my mind up for this year though with the BGM, so quiet and performs too.
COCKSPEED TUNING
- joeythescooterboy
- registered user
- Posts: 183
- Joined: Wed Jan 07, 2009 1:16 am
- Location: Chester
- Contact:
To be fair it doesn't seem to have any massive gains over the SIP 2?
Nemo saltat sorbius, nisi infanus est.
-
- registered user
- Posts: 142
- Joined: Sat Mar 16, 2013 10:53 am
- Main scooter: vespa p210
- Location: Stogursey,West Somerset
- Contact:
I had one on my last 210 and the fit was brilliant as it comes with 3 sleeves for the exhaust stub ,i found it very good with loads of low down torque and it seemed better built than the sip roads i have had in the past .An example is i used to have to take a hill near me in third unless i caught it just right but with the big box it went up in 4th easy
-
- registered user
- Posts: 1208
- Joined: Sat Mar 28, 2009 1:10 pm
- Location: hartlepool
- Contact:
Have a look at these before you go the BGM
These guys were doing px box exhausts long before
http://www.pipedesign.de/engine/index.p ... nal-220-ii
they use genuine piaggio boxes
These guys were doing px box exhausts long before
http://www.pipedesign.de/engine/index.p ... nal-220-ii
they use genuine piaggio boxes
-
- registered user
- Posts: 156
- Joined: Fri Jan 09, 2009 11:14 am
- Main scooter: Lambretta GP Monza 225
- Location: Livingston
- Contact:
Agreed, would be good to see a side by side comparison. Pipe Design have an opportunity to tap into the UK market, but it's rare that you get the chance to see any results, there also seems to be a couple of comments on supply and lead times which doesn't give confidencegaz_powell wrote:Have a look at these before you go the BGM
These guys were doing px box exhausts long before
http://www.pipedesign.de/engine/index.p ... nal-220-ii
they use genuine piaggio boxes
Are they gonna make a T5 variant? Iv heard elsewhere mb are gonna bother.
I like the look and reviews of the pipe design but can't make out what the f@@k is going on on the website.
I like the look and reviews of the pipe design but can't make out what the f@@k is going on on the website.