Am looking to get a malossi 172 kit for my T5. Looking for somewhere to reprofile a 125 head to suit this kit. Have seen Beedspeed do this but am looking for somewhere that is recommended rather than first place I see.
Can any one recommend somewhere to get this done as never done this before with contact details etc.
Cheers
Bruce
reprofile cylinder head for t5 to 172
chiselspeed are good. if you can afford one , get a MMW billet head from SIP.
-
- registered user
- Posts: 321
- Joined: Thu Dec 03, 2009 8:11 pm
- Contact:
try chisel speed but sip do a head as well ask pro porting about his 172 kits .
chislespeed done both of mine
live life your a long time dead
why malossi talk to martin at chislespeed he did me a t5 polini with suzuki piston etc alot cheaper then a malossi kit
live life your a long time dead
Hmmm how much cheaper than the Malossi ????ducksta wrote:why malossi talk to martin at chislespeed he did me a t5 polini with suzuki piston etc alot cheaper then a malossi kit
i paid £160 for a pollini t5 barral ported, brand new suzuki ts 185 piston matched, my cylinder head re profiled+ packer plate
live life your a long time dead
So £160 plus cost of a T5 Polloni barrel.....
-
- registered user
- Posts: 156
- Joined: Fri Jan 09, 2009 11:14 am
- Main scooter: Lambretta GP Monza 225
- Location: Livingston
- Contact:
20 years ago, my friends father turned out my T5 head, as it was centre plug, he put an old plug in then nipped it up in his lathe, then took a couple of mm from the sealing face to ensure it cleared the piston. Worked perfectly.
no he provided the polini barral (2nd hand one) as he had it rebored and fettled the portsMorgan wrote:So £160 plus cost of a T5 Polloni barrel.....
live life your a long time dead