reprofile cylinder head for t5 to 172

[brucie]

Am looking to get a malossi 172 kit for my T5. Looking for somewhere to reprofile a 125 head to suit this kit. Have seen Beedspeed do this but am looking for somewhere that is recommended rather than first place I see.

Can any one recommend somewhere to get this done as never done this before with contact details etc.

Cheers

Bruce

[goldeneye]

chiselspeed are good. if you can afford one , get a MMW billet head from SIP.

[roadrunnerian]

try chisel speed but sip do a head as well ask pro porting about his 172 kits .

[ducksta]

chislespeed done both of mine

[ducksta]

why malossi talk to martin at chislespeed he did me a t5 polini with suzuki piston etc alot cheaper then a malossi kit

[Morgan]

why malossi talk to martin at chislespeed he did me a t5 polini with suzuki piston etc alot cheaper then a malossi kit

Hmmm how much cheaper than the Malossi ????

[ducksta]

i paid £160 for a pollini t5 barral ported, brand new suzuki ts 185 piston matched, my cylinder head re profiled+ packer plate

[Morgan]

So £160 plus cost of a T5 Polloni barrel.....

[ricalnic]

20 years ago, my friends father turned out my T5 head, as it was centre plug, he put an old plug in then nipped it up in his lathe, then took a couple of mm from the sealing face to ensure it cleared the piston. Worked perfectly.

[ducksta]

So £160 plus cost of a T5 Polloni barrel.....

no he provided the polini barral (2nd hand one) as he had it rebored and fettled the ports