anyone make a gearchange for some straight bars ?
-
jonny snatchsniffer
- registered user
- Posts: 277
- Joined: Mon Jan 12, 2009 11:53 am
- Location: camberley, surrey
- Contact:
need a set of straight bars for a chop, trouble is the cases i have access to use the teleflex cable, ala pkxl2/cosa/lml the gear cable doesnt have to fit through the frame so thats not an issue, i know there is a contraption to use a 2 cable set up but ive heard its not too reliable, any ideas much appreciated
-
nicsar
- registered user
- Posts: 35
- Joined: Fri Dec 09, 2011 3:25 am
- Main scooter: fast smallies
- Contact:
Magura makes this one, was used in a Finnish moped. Only 2 speed but may be modified.
http://kauppa.mimoto.fi/product/8235/ma ... -tyd-d6822
http://kauppa.mimoto.fi/product/8235/ma ... -tyd-d6822
what casings are they like? cosa ones? you can just change the gear selector box for an EFL one , and have two gear cables. ive got some Cosa handlebars, with the gearchange and throttle tube etc. that might be able to be butchered/adapted. you can have them for postage, or I"ll bring them to scarborough tomorrow if you are going.