oil on rear hub
-
- registered user
- Posts: 44
- Joined: Fri Jan 28, 2011 4:28 pm
- Main scooter: px125/group 4 lammy
- Contact:
I've got a vespa px 125 put a brand new rear oil seal in ride to work about 15 miles when I got there put rear brake on and keeps going dosnt slow down the rear shoes are covered on oil...the seal is seated properly and correct one fitted any ideas ?
81# group 4 lambretta racing,jb fabs,lth,jubilee scooters
- bazman
- registered user
- Posts: 578
- Joined: Wed Jan 07, 2009 9:02 am
- Playstation gamer tag: bazman70
- Location: Annan S.W. Scotland
- Contact:
You defo have the correct seal for the hub? As there's 2 sizes 27mm and 30mm (i think)?
Old style engine or new? As new have the seal internally fitted behind bearing opposite to older engines where they sit externally .
Old style engine or new? As new have the seal internally fitted behind bearing opposite to older engines where they sit externally .
-
- registered user
- Posts: 44
- Joined: Fri Jan 28, 2011 4:28 pm
- Main scooter: px125/group 4 lammy
- Contact:
its a px 150 casing with the seal on the side were the wheel goes not inside the engine I've used same type of seal for years
81# group 4 lambretta racing,jb fabs,lth,jubilee scooters
theres 2 sizes Jimbob, i.e. 2 differing I.D.s, to accomodate the differing hub centre sizes. Hopefully thats all it is.