Polin 177 kit, revolver exhaust & std.24 mm Dellorto set up

Anything related to Vespas... ask tech questions, post helpful info, or just read and learn.
wink
Posts: 54
Joined: Wed Feb 11, 2009 9:25 pm
Contact:

Hi, I am just about to finish the rebuild and I was wondering what the best set up would be for this type of engine.

Can anyone advise on what would be the correct settings for the stator plate/ignition settings (retarded?) and the jetting for the carb.

Thanks In advance,

Chris
User avatar
hungdog
registered user
Posts: 169
Joined: Wed Sep 16, 2009 2:57 pm
Contact:

http://scooterotica.org/forum/viewtopic.php?f=8&t=10869

Follow these tips if your gonna use Si24 carb,timing fully retard, turn stator fully clock wise and see how it goes. 17-18 degrees.

Jetting is 50-120 idle 160/be3/125 main stack, plug check to take it up or down on main.

usual disclaimer WTFDIK :ninja:
Post Reply Previous topicNext topic
  • Information
  • Who is online

    Users browsing this forum: Ahrefs [Bot], Google [Bot] and 14 guests