can this work ???

Anything related to Lambrettas... ask tech questions, post helpful info, or just read and learn.
fishi
registered user
Posts: 146
Joined: Wed Jan 07, 2009 12:09 pm
Contact:

can this tune/porting work and is it to recommend to maximise transfer area?

or would it influence the mixture flowing/entrance when transfer are opening as the bottom transfer edge is not there ??

anybody has used it ever ??

Image


Thankx

fishi
Last edited by fishi on Tue Feb 10, 2009 6:22 pm, edited 2 times in total.
User avatar
hobospeed
registered user
Posts: 76
Joined: Wed Jan 07, 2009 5:38 pm
Location: Vancouver B.C.
Contact:

click on this link to see the photo:

http://lh3.ggpht.com/_XxNU_JHuK28/SY8en ... _klein.JPG
User avatar
sean brady scooters
Dealer
Posts: 2040
Joined: Mon Jan 05, 2009 12:09 pm
Location: Ripon, North Yorkshire
Contact:

tried that link.......still not getting it......... :?
Sean Brady Scooters - 01765 690 698
fishi
registered user
Posts: 146
Joined: Wed Jan 07, 2009 12:09 pm
Contact:

f....@@@@k PICASA !!!

sometimes pic can been seen some times not !!!

fishi
Avantone
registered user
Posts: 297
Joined: Wed Jan 07, 2009 7:41 am
Main scooter: Lambretta GP
Location: Bromley, Kent
Contact:

Image

Can't help feeling a well shaped passage would flow better.
Tony

Download the (Original) Lambretta Gearbox Visualiser
www.lambrettagearbox.com
User avatar
sean brady scooters
Dealer
Posts: 2040
Joined: Mon Jan 05, 2009 12:09 pm
Location: Ripon, North Yorkshire
Contact:

sorry guys.......still not getting a pic
are you saying that barrel wall has been removed from whole of transfer port length......?
Sean Brady Scooters - 01765 690 698
User avatar
drunkmunkey6969
Moderator
Posts: 2838
Joined: Sun Jan 04, 2009 1:42 pm
Main scooter: '69 Lambretta GP
Location: North Yorkshire
Contact:

Yes Sean ,thats it.

Can you see this pic:
Attachments
kawa240_3_klein.JPG
kawa240_3_klein.JPG (23.34 KiB) Viewed 7754 times
See our YouTube scooter channel for Tech-help: https://www.youtube.com/c/TheScooterFactory/videos
fishi
registered user
Posts: 146
Joined: Wed Jan 07, 2009 12:09 pm
Contact:

sean brady scooters wrote:sorry guys.......still not getting a pic
are you saying that barrel wall has been removed from whole of transfer port length......?
YES ! :roll:
User avatar
sean brady scooters
Dealer
Posts: 2040
Joined: Mon Jan 05, 2009 12:09 pm
Location: Ripon, North Yorkshire
Contact:

cheers dan.........
ooooooh thats a bit extreme....... :shock:
having said that......i,m sure the motor will still run.....ok......but i agree that it would be better to have some inner wall left,especially to supply the correct angle of entry of gases into bore...........
Sean Brady Scooters - 01765 690 698
User avatar
drunkmunkey6969
Moderator
Posts: 2838
Joined: Sun Jan 04, 2009 1:42 pm
Main scooter: '69 Lambretta GP
Location: North Yorkshire
Contact:

fishi wrote:can this tune/porting work and is it to recommend to maximise transfer area?

or would it influence the mixture flowing/entrance when transfer are opening as the bottom transfer edge is not there ??

anybody has used it ever ??
Where did you get the pic? What machine is it from?

A normal transfer wall has an 'arc' on the inside to help direct the flow.....so the increased area benefits of the cylinder in the pic maybe outweighed because of this.

Would be interesting to see it on a dyno back-2-back with an identical engine that has a standard spigot.
See our YouTube scooter channel for Tech-help: https://www.youtube.com/c/TheScooterFactory/videos
Post Reply Previous topicNext topic
  • Information
  • Who is online

    Users browsing this forum: Amazon [Bot], Google [Bot] and 19 guests