hi
got no room for my TMX carb so i need to cut the right panel but never had to do that....
is there any tips or easy way to do it and to locate the corect place to put the hole ?
cheer's
panel cutout help!
-
SCREWDRIVER
- registered user
- Posts: 27
- Joined: Thu Apr 30, 2009 9:50 pm
- Location: 100 Km north of Paris froggy land
- Contact:
[URL=http://img691.imageshack.us/i/lcgb.gif/][img]http://img691.imageshack.us/img691/4658/lcgb.gif[/img][/URL]
If your panels have a decent spray job and you don't want to damage the paintwork use a Q-max cutter. These cut through your bodywork no problem and, as it's a handtool rather than electric you can take your time and not crack all the lacquer on your paintjob.
-
Bilko
- registered user
- Posts: 1346
- Joined: Thu Jan 08, 2009 12:06 pm
- Main scooter: LI150
- Location: Belfast
- Contact:
chiggy03 wrote:If your panels have a decent spray job and you don't want to damage the paintwork use a Q-max cutter. These cut through your bodywork no problem and, as it's a handtool rather than electric you can take your time and not crack all the lacquer on your paintjob.
Agreed. I got one of these after seeing a post by Soulsurfer. Works an absolute treat and made it so much easier to do and neat too.