MB gear selector spring

[giankx]

Hi, i've just started to build my Ts1 and i've fitted an MB selector spring.
Will i have problems changing the gears? Will it be too stiff?

[Ian Hepworth]

You will have no problems if you use Nylon lined clutch and gear cables, routed with NO kinks or tight bends. Easy stuff!

[lifes a drag]

i had an uprated spring with nylon lined cables all correctly routed ,, could i change gear ? not very easily

gave my mate ago to make sure it wasnt me being a whimp ,,, same with him ,,

[mark]

same here

[DJB]

I had one, but not from MB and i couldnt even get it into the layshaft. Standard ones are fine(I think) There's alot of crap about :

[giankx]

Ok, but you refer all to the Mb spring or to other different ones?
I'll use nylon lined cables and hope to not have problems.
I Have bought these : http://www.scooterrestorations.com/lamb ... ree-black/
Will they up the job?

[DJB]

Ok, but you refer all to the Mb spring or to other different ones?
I'll use nylon lined cables and hope to not have problems.
I Have bought these : http://www.scooterrestorations.com/lamb ... ree-black/
Will they up the job?

You could always call on popeye

[giankx]

[cezeta]

too stiff for me, ive never had a scooter jump out of gear either

[sean brady scooters]

surely the stronger springs do what they are supposed to do and that is to help prevent gears jumping out ,and to provide a better /more positive selection.

although they may seem somewhat difficult at first,time and use will tame these....