rb225 port map ? Pleeeessee

Anything related to Lambrettas... ask tech questions, post helpful info, or just read and learn.
User avatar
carlos fandango
registered user
Posts: 792
Joined: Wed Jan 07, 2009 12:51 am
Location: Stourbridge
Contact:

Hi
Any one got a RB225 port map the could post up please?
Thanks
When i was young my Mom said "if you haven't got anything nice to say, say nothing at all " ..................... and people wonder why I'm quiet around them !
User avatar
carlos fandango
registered user
Posts: 792
Joined: Wed Jan 07, 2009 12:51 am
Location: Stourbridge
Contact:

Someone must have one :? :?
Ive got a damaged rb barrel that is 72mm bore but has 2 finger ports like the rb22 not 3 like the rb25 :? so im trying to ascertain if its a prototype 250 0r a bored out 225 :?
so can any one shed any light on it ?
Thanks
Russell
When i was young my Mom said "if you haven't got anything nice to say, say nothing at all " ..................... and people wonder why I'm quiet around them !
User avatar
sean brady scooters
Dealer
Posts: 2040
Joined: Mon Jan 05, 2009 12:09 pm
Location: Ripon, North Yorkshire
Contact:

i,m sure dan did one a while ago...try a seach. failing that look on old forum .
Sean Brady Scooters - 01765 690 698
User avatar
carlos fandango
registered user
Posts: 792
Joined: Wed Jan 07, 2009 12:51 am
Location: Stourbridge
Contact:

Hi Sean
yes ive tried that and got the rb20 and rb25 but cant find the rb22 :?
When i was young my Mom said "if you haven't got anything nice to say, say nothing at all " ..................... and people wonder why I'm quiet around them !
User avatar
sean brady scooters
Dealer
Posts: 2040
Joined: Mon Jan 05, 2009 12:09 pm
Location: Ripon, North Yorkshire
Contact:

spigot size on RB22 is 75mm
bore is 70m,and so spigot thickness is approx 2.5mm
Sean Brady Scooters - 01765 690 698
User avatar
carlos fandango
registered user
Posts: 792
Joined: Wed Jan 07, 2009 12:51 am
Location: Stourbridge
Contact:

Well that the other odd thing the spigot is 78mm (so 3mm wall) and not stepped like the other 250s ive seen
Ive found a port map now.... and it has the same layout as a 225 :?
I should of said..... its unused aswell with a broken spigot ?
When i was young my Mom said "if you haven't got anything nice to say, say nothing at all " ..................... and people wonder why I'm quiet around them !
johnd
registered user
Posts: 185
Joined: Wed Jan 07, 2009 7:53 pm
Main scooter: 1970 Dl125
Location: Belfast, Ireland
Contact:

I dropped My RB kit when i first got it and bent the spigot, but after i'd stopped screaming and crying i got out the dremel and got my mate (my hands were still shaking from dropping it) to remove the bent bit of the spigot. We did this progressively so as not to take more than we needed away.
Its been in the scooter now for around 2500klms now with no problems.
User avatar
rossi46
registered user
Posts: 91
Joined: Wed Jan 07, 2009 11:40 am
Location: Labrador, Queensland
Contact:

Here ya go

Image
User avatar
carlos fandango
registered user
Posts: 792
Joined: Wed Jan 07, 2009 12:51 am
Location: Stourbridge
Contact:

Thanks rossi
i had managed to find it but thanks anyway
Russ
When i was young my Mom said "if you haven't got anything nice to say, say nothing at all " ..................... and people wonder why I'm quiet around them !
Post Reply Previous topicNext topic
  • Information
  • Who is online

    Users browsing this forum: No registered users and 17 guests