stand help
-
- registered user
- Posts: 1900
- Joined: Wed Jan 14, 2009 12:21 am
- Contact:
Anyone got simpole instructions on how to fit a stand on a series 3. Cant seem to get the F***er on....Keeps catching and i cant see why?..
- rog60
- registered user
- Posts: 588
- Joined: Fri Feb 13, 2009 7:18 pm
- Main scooter: Indian GP200
- Location: SWINDON (Wilts)
- Contact:
If you're starting from frame only, attach the spring to both mounting points then attach the stand hooks splash plate ,nuts and bolts on at a time (Is a bit fiddly but the best way I've found so far). I put a blob of grease into the stand hooks first for lubrication.........
Any use
Any use
NO IT'S NOT A F***IN* MOPED!!!!!!
-
- registered user
- Posts: 465
- Joined: Sun Mar 22, 2009 5:15 am
- Location: Richmond Virginia, USA
- Contact:
I'm with Rog on this. No chance of miffed up knuckles because the spring stretcher/ spring pryer/big 'ol screwdriver slipped.
That's not going anywhere...
- Andy Pickering
- registered user
- Posts: 2172
- Joined: Sun Jan 25, 2009 10:15 pm
- Main scooter: GP
- Location: Hull
- Contact:
Me to rog best way Ive found..
Ricspeed, gone but never forgotten RIP my friend #59
-
- registered user
- Posts: 1900
- Joined: Wed Jan 14, 2009 12:21 am
- Contact:
Cheers lads, issue was threads were way to long....
sef
sef
-
- registered user
- Posts: 1900
- Joined: Wed Jan 14, 2009 12:21 am
- Contact:
yeah were coming out of hole on other side....all sorted now