Need a bit of help ,, built a 175 engine,lammy, 30 mm delly ,scootrs pipe, got ma jetting just about right , but wondered what Float Needle Valve size to use its got a 225 in it at mo , but when i get to between 1/2 and 3/4 throttle is splutters a bit , any ideas,,,??
jets are as follows
120 main
x13 needle ,2nd clip
av 260
and a 52 pilot
choke 70
ps ,,can be a pain in the ass to start some times but after it starts its ok
Carburettor - Float Needle Valve ,, what size
- sean brady scooters
- Dealer
- Posts: 2040
- Joined: Mon Jan 05, 2009 12:09 pm
- Location: Ripon, North Yorkshire
- Contact:
try an AV264 diffuser/atomiser...
your tap jet would be better at 250.
your tap jet would be better at 250.
Sean Brady Scooters - 01765 690 698