Tameni GP crank needs small end shims in an Indian GP 200?

[Davidsquaredson]

Hi, I measured the big end float when the crank was on my bench. Was 0.5mm

That is a big end shimmed, yes?

Or no, I need to shim the little end


Sent from my iPhone using Tapatalk

[garry inglis]

One or the other never both

Sent from my SM-G960F using Tapatalk

[Davidsquaredson]

Yes. It’s why I’m asking if the tameni crank is shimmed on the big end. It does not seem to have a lot of side to side movement, but I hope to hear from someone who knows


Sent from my iPhone using Tapatalk

[Muppet]

as is no piston shims needed