Does anybody know which valves fit the rims and were to purchase them from please
as I`m finding it hard in my neck of the woods.
Coppull, lancashire.
ScootRS tubeless Rims
- HxPaul
- registered user
- Posts: 1110
- Joined: Fri Dec 06, 2013 1:58 pm
- Main scooter: lambretta Li 150
- Location: Halifax,Yorkshire
- Contact:
https://www.ebay.co.uk/itm/2Pcs-Silver- ... Sw3ehdwpCZ
If they dont fit,try these.
If they dont fit,try these.
-
- registered user
- Posts: 268
- Joined: Fri Jan 16, 2009 11:22 am
- Location: coppull,lancashire
- Contact:
Thanks HxPaul for the reply,but none of them will fit,there's a centre ring which bolts to the hubs the valve holes is directly under it in the centre of the wheel,wish I had a picture to show you what I mean.
- GTFOMWSC
- registered user
- Posts: 290
- Joined: Sat Jan 01, 2011 5:49 pm
- Main scooter: GP230 Super Monza CS Tuned
- Location: Rugby
- Contact:
Could they be the same as the FIA wheel? sounds like it's similar i found i couldn't get any for one of those as they were different to every valve. If so as Rimini do that wheel you could email them to see if they'd send you some
the man don't give a f@@k
- HxPaul
- registered user
- Posts: 1110
- Joined: Fri Dec 06, 2013 1:58 pm
- Main scooter: lambretta Li 150
- Location: Halifax,Yorkshire
- Contact:
I use these https://www.ebay.co.uk/itm/1-x-90-Degre ... Ciid%3A1By the way I have ScootRS tubeless wheel rims and if the ring is in the way,cut it off with a hack saw.
-
- registered user
- Posts: 1693
- Joined: Tue Jan 31, 2012 8:54 pm
- Main scooter: Lambretta GP
- Contact:
I am using similar to the ones shown in the link, mine may have been sourced via DemonTweaks. You're quite right that they do not fit without doing some extra work to the rim and/or valve to provide the additional clearance required but I took a little off each until they did, then used silver touch-up on rim to stop rust.
I have these rims fitted to my Jet, which then did the Spanish Euro and back without issue.
Adam
I have these rims fitted to my Jet, which then did the Spanish Euro and back without issue.
Adam
-
- registered user
- Posts: 4823
- Joined: Tue Oct 25, 2011 9:50 pm
- Main scooter: Lambretta
- Location: Lanarkshire
- Contact:
When I used to use these rims I dremelled out a section above the hole for the valve and fitted Bridgeport valves
"Our dilemma is that we hate change and love it at the same time; what we really want is for things to remain the same but get better."