ScootRS tubeless Rims

Anything related to Lambrettas... ask tech questions, post helpful info, or just read and learn.
Tosh
registered user
Posts: 263
Joined: Fri Jan 16, 2009 11:22 am
Location: coppull,lancashire
Contact:

Tue Feb 04, 2020 9:29 pm

Does anybody know which valves fit the rims and were to purchase them from please
as I`m finding it hard in my neck of the woods.
Coppull, lancashire.

User avatar
HxPaul
registered user
Posts: 1087
Joined: Fri Dec 06, 2013 1:58 pm
ebay user ID: panhead_5
Main scooter: lambretta Li 150
Location: Halifax,Yorkshire
Contact:

Wed Feb 05, 2020 6:06 pm


User avatar
HxPaul
registered user
Posts: 1087
Joined: Fri Dec 06, 2013 1:58 pm
ebay user ID: panhead_5
Main scooter: lambretta Li 150
Location: Halifax,Yorkshire
Contact:

Wed Feb 05, 2020 6:29 pm


Tosh
registered user
Posts: 263
Joined: Fri Jan 16, 2009 11:22 am
Location: coppull,lancashire
Contact:

Wed Feb 05, 2020 10:01 pm

Thanks HxPaul for the reply,but none of them will fit,there's a centre ring which bolts to the hubs the valve holes is directly under it in the centre of the wheel,wish I had a picture to show you what I mean.

User avatar
GTFOMWSC
registered user
Posts: 290
Joined: Sat Jan 01, 2011 5:49 pm
ebay user ID: itsthewillo
Main scooter: GP230 Super Monza CS Tuned
Location: Rugby
Contact:

Thu Feb 06, 2020 7:45 am

Could they be the same as the FIA wheel? sounds like it's similar i found i couldn't get any for one of those as they were different to every valve. If so as Rimini do that wheel you could email them to see if they'd send you some
the man don't give a f@@k

User avatar
HxPaul
registered user
Posts: 1087
Joined: Fri Dec 06, 2013 1:58 pm
ebay user ID: panhead_5
Main scooter: lambretta Li 150
Location: Halifax,Yorkshire
Contact:

Thu Feb 06, 2020 10:13 am

I use these https://www.ebay.co.uk/itm/1-x-90-Degre ... Ciid%3A1By the way I have ScootRS tubeless wheel rims and if the ring is in the way,cut it off with a hack saw.

Adam_Winstone
registered user
Posts: 1671
Joined: Tue Jan 31, 2012 8:54 pm
Main scooter: Lambretta GP
Contact:

Thu Feb 06, 2020 12:52 pm

I am using similar to the ones shown in the link, mine may have been sourced via DemonTweaks. You're quite right that they do not fit without doing some extra work to the rim and/or valve to provide the additional clearance required but I took a little off each until they did, then used silver touch-up on rim to stop rust.

I have these rims fitted to my Jet, which then did the Spanish Euro and back without issue.

Adam

Tosh
registered user
Posts: 263
Joined: Fri Jan 16, 2009 11:22 am
Location: coppull,lancashire
Contact:

Wed Feb 12, 2020 10:49 pm

Thanks to all who replied, very much appreciated at the moment im waiting for some brass ones to arrive with a slight bend on them ,hope there going to fit before I attack the rims
Ta Paul

User avatar
rosscla
registered user
Posts: 4804
Joined: Tue Oct 25, 2011 9:50 pm
Main scooter: Lambretta
Location: Lanarkshire
Contact:

Wed Feb 26, 2020 2:11 am

When I used to use these rims I dremelled out a section above the hole for the valve and fitted Bridgeport valves
"Our dilemma is that we hate change and love it at the same time; what we really want is for things to remain the same but get better."

Post Reply Previous topicNext topic
  • Information
  • Who is online

    Users browsing this forum: No registered users and 3 guests