GT186 revs Question
- Burnside
- registered user
- Posts: 315
- Joined: Wed Feb 22, 2012 9:22 pm
- Main scooter: Lambretta TV200
- Location: Norwich
- Contact:
My 186 is jetted same as yours with the only difference being AV268 needle jet and 300 float needle, I run with a Franspeed race. No rev counter on mine but happily revs 8000+.
-
- registered user
- Posts: 83
- Joined: Mon May 25, 2015 8:37 am
- Main scooter: Lambretta Li S2 GT186
- Location: The Shire
- Contact:
Thanks everyone,
I know RT's not a fan of the Varitronic but it's what I had previously and I'm hoping not to change it due to cost largely and it's always worked well. I'll follow the recommended steps and see what happens.....
I know RT's not a fan of the Varitronic but it's what I had previously and I'm hoping not to change it due to cost largely and it's always worked well. I'll follow the recommended steps and see what happens.....
-
- registered user
- Posts: 83
- Joined: Mon May 25, 2015 8:37 am
- Main scooter: Lambretta Li S2 GT186
- Location: The Shire
- Contact:
Just an update.... I double checked and I had actually already fitted an AV268 and a 300 float jet (it’s my age!) so that’s not the issue. I’ve been using a remote breathe sweet type filter on an elbow which points backwards because if long range tank and it looked it a bit oily in the elbow, wondering if it’s not getting enough air.... just a thought. Have ordered a gauze trumpet bellmouth thingy to try, would like something in place to keep the crap out...
-
- registered user
- Posts: 83
- Joined: Mon May 25, 2015 8:37 am
- Main scooter: Lambretta Li S2 GT186
- Location: The Shire
- Contact:
That’s what I’m wondering, I’ll report back when I’ve tried it. Either that or the TSR pipe isn’t as revvy as the manufacturers claim and then I guess it will be settle with it or try a different pipe - the Fran Race isn’t cheap, though, eh....?
I wonder what a Gori or a Ron Moss box pipe would be like if I end up having to spend out..... although I’ve just repacked the tail can on the TSR to quieten it down a bit and I don’t want anything annoyingly loud...
- Burnside
- registered user
- Posts: 315
- Joined: Wed Feb 22, 2012 9:22 pm
- Main scooter: Lambretta TV200
- Location: Norwich
- Contact:
No Fran Races aren't cheap, but then Gori and Ron Moss pipes aren't either tbh. I'm on my 2nd Fran Race after the 1st one rotted through, the downside of riding 12 months a year. I got the current one ceramic coated to make it more durable and is holding up well so far.