rt 195

Anything related to Lambrettas... ask tech questions, post helpful info, or just read and learn.
lammy666
registered user
Posts: 38
Joined: Sun May 29, 2016 11:30 pm
Main scooter: lambretta li 125/190 chop.
Contact:

any suggestions on the type of clutch i should use on my new build rt195.
i will be running a box exhaust and a 25mm dellorto through the air box/
thanks in advance
jayteemmm
registered user
Posts: 7
Joined: Tue Mar 15, 2016 8:25 pm
Main scooter: Lambretta TV175
Contact:

Hi
I am currently building a similar setup
I also want to put a GP crank in place of the existing LI crank
rosscla
registered user
Posts: 4823
Joined: Tue Oct 25, 2011 9:50 pm
Main scooter: Lambretta
Location: Lanarkshire
Contact:

I've just put a Readspeed one in my Rt 225 it's very grippy. Standard clutch was slipping on the compression just on the kickstart.

It's about 45£ for the corks, steels and springs. Done 300K running in in the last week or so and seems fine.
"Our dilemma is that we hate change and love it at the same time; what we really want is for things to remain the same but get better."
User avatar
garry inglis
registered user
Posts: 1298
Joined: Tue Jul 21, 2015 8:04 pm
Main scooter: ts1 230 and rb200
Location: darlington
Contact:

surflex plates with mb springs more than you need
User avatar
Burnside
registered user
Posts: 315
Joined: Wed Feb 22, 2012 9:22 pm
Main scooter: Lambretta TV200
Location: Norwich
Contact:

Readspeed 5 plate, running them in my GT186 and GT200, been good as gold for several k miles
lammy666
registered user
Posts: 38
Joined: Sun May 29, 2016 11:30 pm
Main scooter: lambretta li 125/190 chop.
Contact:

cheers for the info guys
Mrnice71
registered user
Posts: 111
Joined: Tue Jul 11, 2017 9:41 pm
Main scooter: Lambretta series 3
Contact:

A 4 plate should be fine with that set up , the scootopia clutch plates are good with MB springs and rough the steel plates up a bit and putoline SAE 90 gear oil should hold
lozmondo
registered user
Posts: 193
Joined: Sun Mar 01, 2009 10:25 am
Location: Darkside of Aldershot
Contact:

Done 1000,s of miles on BGM plates and MB springs on RT195, bgm pipe and 30mm carb
User avatar
HxPaul
registered user
Posts: 1110
Joined: Fri Dec 06, 2013 1:58 pm
Main scooter: lambretta Li 150
Location: Halifax,Yorkshire
Contact:

I've got a Casa 185 kit.I use a 4 plate clutch with standard springs,never a problem.
Post Reply Previous topicNext topic
  • Information
  • Who is online

    Users browsing this forum: Google [Bot], Semrush [Bot] and 20 guests