AFR Fresco endcan

Anything related to Lambrettas... ask tech questions, post helpful info, or just read and learn.
User avatar
essexgp
registered user
Posts: 287
Joined: Wed Jan 07, 2009 6:16 pm
Main scooter: Indian Gp200 Indian Gp Cutdown
Location: Canvey Island
Contact:

I know this might be a daft question but does anyone know if you can fit a different endcan to an AFR Fresco, ive measured from the top of each stud to stud and it measures 50mm is this where you measure or from the side of each stud

Thanks in anticipation
User avatar
garry inglis
registered user
Posts: 1298
Joined: Tue Jul 21, 2015 8:04 pm
Main scooter: ts1 230 and rb200
Location: darlington
Contact:

You measure centres and most endcans are 40mm or 45mm centre

Sent from my SM-A320FL using Tapatalk

holty
registered user
Posts: 908
Joined: Wed Jul 15, 2015 11:52 pm
Main scooter: lambretta gp
Location: east yorkshire
Contact:

tsr evo end cans are easy to adapt as the end that has the 3 threaded holes is 10mm thick aluminium so you can re-do the holes inbetween the original holes and re-tap
Post Reply Previous topicNext topic
  • Information
  • Who is online

    Users browsing this forum: Ahrefs [Bot] and 17 guests