Cracked casing

Anything related to Lambrettas... ask tech questions, post helpful info, or just read and learn.
User avatar
garry inglis
registered user
Posts: 1298
Joined: Tue Jul 21, 2015 8:04 pm
Main scooter: ts1 230 and rb200
Location: darlington
Contact:

Crank installed maghousing and stator back in ImageImage

Sent from my SM-A320FL using Tapatalk

User avatar
garry inglis
registered user
Posts: 1298
Joined: Tue Jul 21, 2015 8:04 pm
Main scooter: ts1 230 and rb200
Location: darlington
Contact:

Drive sprocket and clutch and pull down back in Image

Sent from my SM-A320FL using Tapatalk

cgt75b
registered user
Posts: 603
Joined: Thu Sep 22, 2011 8:05 pm
Main scooter: lambretta
Contact:

Has it been welded?
User avatar
garry inglis
registered user
Posts: 1298
Joined: Tue Jul 21, 2015 8:04 pm
Main scooter: ts1 230 and rb200
Location: darlington
Contact:

No this is a new casing

Sent from my SM-A320FL using Tapatalk

cartmel808
registered user
Posts: 467
Joined: Tue Feb 04, 2014 10:35 am
Main scooter: 1975 Vespa Rally 200 Femsa
Location: Durham, England
Contact:

Looks like your enjoying yourself there Garry.


Sent from my iPhone using Tapatalk
Minority
registered user
Posts: 673
Joined: Wed Feb 01, 2012 2:00 pm
Main scooter: Li230 S3
Location: Perth, Western Australia
Contact:

Is it my imagination Gary, or does the mag side silentblock look as though it’s not all the way in?
Grumpy225
registered user
Posts: 650
Joined: Sat Nov 24, 2012 7:59 am
Main scooter: Gori200, rt195, ld150,rb20
Location: Bakersfield, CA
Contact:

Looks about 2mm out of where it should be.
User avatar
garry inglis
registered user
Posts: 1298
Joined: Tue Jul 21, 2015 8:04 pm
Main scooter: ts1 230 and rb200
Location: darlington
Contact:

There's some eagle eyed amongst us on here yes it is I don't no weather it's the casing or the mount but the f@@ker won't go in I'll have another look at it

Sent from my SM-A320FL using Tapatalk

User avatar
garry inglis
registered user
Posts: 1298
Joined: Tue Jul 21, 2015 8:04 pm
Main scooter: ts1 230 and rb200
Location: darlington
Contact:

cartmel808 wrote:Looks like your enjoying yourself there Garry.Image


Sent from my iPhone using Tapatalk
Hi cartmel 808 I am all this started with no back brake bloody lambretta ImageImage

Sent from my SM-A320FL using Tapatalk

User avatar
garry inglis
registered user
Posts: 1298
Joined: Tue Jul 21, 2015 8:04 pm
Main scooter: ts1 230 and rb200
Location: darlington
Contact:

Sorted the engine mount the chamfer on the casing was not machined properly so dremmel that and now sits in correct top end built up air leak test next and timing check with the buzzwangle ImageImage

Sent from my SM-A320FL using Tapatalk

Post Reply Previous topicNext topic
  • Information
  • Who is online

    Users browsing this forum: No registered users and 18 guests