Any thoughts appreciated.
Standard Li150 gearbox. Goes through the gears static. Goes through the gears when riding, except, finding neutral when slowing down. It's really difficult, end up struggling between first and second before double-handed wrench into neutral.
difficult neutral
- garry inglis
- registered user
- Posts: 1298
- Joined: Tue Jul 21, 2015 8:04 pm
- Main scooter: ts1 230 and rb200
- Location: darlington
- Contact:
Just slacken off on one or the other a few runs try that and a bit more if needed
Sent from my SM-A320FL using Tapatalk
Sent from my SM-A320FL using Tapatalk
It's not cables and the clutch is fine. keep the ideas coming
- garry inglis
- registered user
- Posts: 1298
- Joined: Tue Jul 21, 2015 8:04 pm
- Main scooter: ts1 230 and rb200
- Location: darlington
- Contact:
Headset off and see what's happening could be outer has come out of slot
Sent from my SM-A320FL using Tapatalk
Sent from my SM-A320FL using Tapatalk
A bit more info. It's none of the obvious things. It's been like it since I built the engine over a year ago. Initially I thought (hoped) it would ease as the scooter was used. Perhaps a sharp edge in there somewhere was snagging? But no change after more than 1200 miles.
- garry inglis
- registered user
- Posts: 1298
- Joined: Tue Jul 21, 2015 8:04 pm
- Main scooter: ts1 230 and rb200
- Location: darlington
- Contact:
Well I would take side off check the clutch and endplate off and check gears you might have 2nd gear with the boss the wrong way the tree could be chipped or worn
Sent from my SM-A320FL using Tapatalk
Sent from my SM-A320FL using Tapatalk
- garry inglis
- registered user
- Posts: 1298
- Joined: Tue Jul 21, 2015 8:04 pm
- Main scooter: ts1 230 and rb200
- Location: darlington
- Contact:
It definitely needs open heart surgery
Sent from my SM-A320FL using Tapatalk
Sent from my SM-A320FL using Tapatalk