Page 1 of 1

Rear hub stud sizes

Posted: Wed Jun 27, 2018 11:52 pm
by tavspeed
Had some sip tubeless rims to fit for a mate
Wound out the existing studs. No problems but couldn’t get the sip studs to wind in measured them with verniers sip measure 10mm on the left hand part the original ones 8.7mm
has he got a oddball hub or are the sip studs wrong

Re: Rear hub stud sizes

Posted: Wed Jun 27, 2018 11:57 pm
by tavspeed
Rear hub havent tried front hub yet

Re: Rear hub stud sizes

Posted: Thu Jun 28, 2018 5:17 am
by garry inglis
I have two sets of sip wheels and the studs just went in as normal if one of your mates has a spair wheel he should have spare studs try them for size

Sent from my SM-A320FL using Tapatalk


Re: Rear hub stud sizes

Posted: Thu Jun 28, 2018 5:38 am
by Minority
Standard thread size 10 x 1 (left hand), sounds like you have an odd size hub. :(

Re: Rear hub stud sizes

Posted: Thu Jun 28, 2018 5:01 pm
by dennis
sounds like it's a ramp rear hub,they are smaller stud threads.

Re: Rear hub stud sizes

Posted: Fri Jun 29, 2018 10:49 am
by Burnside
dennis wrote:
Thu Jun 28, 2018 5:01 pm
sounds like it's a ramp rear hub,they are smaller stud threads.
If it is a Ramp hub I'd ditch it straight away